![]() ![]() Usefully, the green LED also gets brighter when a higher signal level is present.īeing able to alter the input gain with a rotary control is a major difference between the Jam and competitors. The LED is useful in that it has three colours: blue means that the Jam is connected but not active, green means connected and active, and red means that the signal level has overloaded the input. It's good that the jack socket itself has a solid feel that compares favourably with competitors. On the other hand, if you forget the cable for your Jam at a gig, you're stuck. In the favour of the Jam is the fact that the cables are detachable, so if one of them breaks, you won't need to replace the unit, unlike the competing iRig or Peavey AmpKit Link. On the inside, the analogue to digital conversion circuitry operates at 44.1kHz, 24-bit.Īs far as connection is concerned, there are some pros and cons to consider. There's also a three-state LED indicator, a quarter-inch jack socket and a USB output socket. The unit itself is very light, with a plastic body, and has a small plastic thumb-wheel on the side to control input gain. Each of the cables locks securely into its respective socket, too, keeping it secure when you're playing. #Jam up vs ampkit free#Although the cables are relatively short, they do free the Jam from needing to connect directly to the iPad, something that would put unnecessary strain on the socket and the Jam itself. The small interface is supplied with two cables: one for connection to the iPad (or other iOS device), and the other for connection to a Mac. The Apogee Jam has a jack input for guitar and a single USB port that sends digital audio to the host device. ![]() ![]() #Jam up vs ampkit mac os#The Jam requires iOS 4.3 or later and a Core Audio-compatible app, or Mac OS 10.6.4 or later if it's being used with OS X. A further important distinction between the Jam and its competitors is that it has no audio output, so you'll need to connect headphones or speakers to the jack socket of the host device. Unlike most such devices, which utilise the bi-directionality of the headphone socket for input and output, and rely on the A-D converters in the host device, the Jam uses the dock port to connect and has its own on-board A-D converters. Apogee's Jam is an audio interface designed to connect a guitar to an iPad, iPhone or Mac. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |